The effect of structural changes on the self-assembly of novel green pyridinium-carboxylate gemini surfactants in Langmuir and Langmuir-Blodgett films.

Engineered molecules with tailored molecular structures have the potential to advance various disciplines by enhancing the properties of biological membranes. In this study, we investigated the fundamental interfacial behavior of newly synthesized, water insoluble, cationic pyridinium-carboxylate based gemini surfactants (GSs) using picolinic acid (PA), nicotinic acid (NA), and isonicotinic acid (INA) and their interactions with dipalmitoylphosphatidylcholine (DPPC) in Langmuir and Langmuir-Blodgett (LB) films. Two synthetic methodologies were employed: (a) connecting two alkyl pyridinecarboxylates through the nitrogen atoms with a xylenyl spacer, namely, PAGS, NAGS1, and INAGS; and (b) dimerizing two nicotinic acid molecules through ester linkages with 1,4-benzenedimethanol, and then quaternizing the pyridine nitrogens with hexadecyl chains to yield NAGS2. A combination of Brewster angle microscopy (BAM) and atomic force microscopy (AFM) imaging techniques yielded valuable insights into the morphology of the GS films and their mixtures with DPPC. Density functional theory (DFT) calculations were used to gain further information on the GSs structures and understand their assembly. The results indicate that the film of INAGS is the most hydrophobic film, and its monolayer is the least compressible. When the nitrogen atom and a carboxylate group of the headgroup are positioned closer to each other, the GS molecules tend to form aggregates instead of a continuous film which is observed for the INAGS surfactant. This observation is consistent with the DFT energy values of pair interactions, indicating that both PAGS and NAGS1 have closely packed conformations with high stabilization energy.

Mixing in Langmuir Monolayers: Perfluorotetradecanoic Acid and a Gemini Surfactant without a Linker.

A recently reported anionic gemini surfactant, a member of the so-called "gemini without a linker" family, has recently been reported to form closely packed crystalline monolayers at the air-water interface. In this work, the impact on monolayer properties of the compound, C18-0-C18, that result from its mixing with a benchmark perfluorinated surfactant, perfluorotetradecanoic acid (PF), is explored. The films exhibit nonideal mixing, as determined by surface pressure-area (π-A) isotherms and surface potential measurements, and phase-separation between the two components was observed by the direct visualization of the monolayers, and grazing-incident X-ray diffraction at the air-water interface. The pure and mixed films follow similar trends in the order of C18-0-C18 < PF < χPF = 0.50 mixed films for both their extent of hysteresis and their stability at the air-water interface. Further, crystallographic data for the mixed film emerge as a simple combination of distinct diffraction patterns characteristic of both the individual components, consistent with the other findings reported here and thus clarify the intermolecular behavior of the binary mixture at the surface.

Physicochemical Properties of Monolayers of a Gemini Surfactant with a Minimal-Length Spacer.

Fundamental physical chemical properties of monolayers formed from a new anionic gemini surfactant with a minimal-length (single-bond) spacer unit have been investigated at the air-water interface and compared with those of monolayers formed from affiliated comparator surfactants. The minimal spacer surfactant, dubbed C18-0-C18, exhibited strikingly different packing characteristics from an anionic gemini surfactant with a comparatively bulkier headgroup, including the formation of close-packed, crystalline films, and shared similar characteristics to simple fatty acid-based monolayers. Monolayers of C18-0-C18 also exhibited good stability at the air-water interface and transferred with reasonable efficiency to solid substrates, although the film integrity was compromised during the transfer. Results from this work suggest that the single-bond spacer approach might be more broadly useful for designing gemini surfactants that pack efficiently into ordered monolayers.

Interfacial Behavior of Modified Nicotinic Acid as Conventional/Gemini Surfactants.

We report the synthesis and monolayer properties of conventional and gemini surfactants composed of nicotinic acid-based head groups with an emphasis on assessing how chemical structures affect the behavior of monolayers. A combination of Brewster angle microscopy and atomic force microscopy showed that pure hexadecyl nicotinate formed rippled strands in monolayers, and the gemini correspondents with either flexible or rigid organic linkers resulted in lobed-compact domains, which provides a simple method for patterning air-water and solid-air interfaces. The structural differences between conventional and gemini nicotinic acid-based surfactants could be explained by the interplay between line tension (that favors the formation of circular domains), balanced by dipole-dipole repulsion interaction between headgroups, which promotes extended domains. Miscibility and morphology studies of the modified nicotinic acid surfactants with palmitic acid demonstrated that the properties of mixed films can be controlled by the structure of the former. Excess Gibbs free energies of mixing indicated that the mixed films were less stable than the pure monolayers, and the positive deviations from ideality were the largest in the case of gemini surfactants.

Pattern Formation in Phase-Separated Langmuir and Langmuir Monolayer Films.

Mixed monolayer films comprising hydrogenated and fluorinated surfactants can undergo phase separation to produce interfaces with diverse structures at the micrometer and nanometer scales. This review discusses our progress over the past decade to probe the relationship that exists between the molecular structure of the surfactants that comprise the films and the overall patterns formed in the monolayers. We review two main classes of mixed perfluorocarbon-hydrocarbon surfactant systems, including fatty acids and a recently developed family of EDTA-based gemini surfactants. In addition to summarizing the state-of-the-art of this field, the key scientific questions and relationships that require further elucidation are discussed, along with directions for continuing research into this fascinating area of research.

Single-Molecule Fluorescence Spectroscopy of Phase-Separated 10,12-Pentacosadynoic Acid Films.

Phase-separated monolayers of 10,12-pentacosadiynoic acid and perfluorotetradecanoic acid can be photopolymerized to produce micrometer-sized, fluorescent polydiacetylene fibers at the air-solid interface. The photopolymer fibers were not uniformly fluorescent but rather showed a series of fluorescent spots along their lengths. The spots exhibited the classic properties of single-molecule fluorescence emission, including diffraction-limited size and fluorescence intermittency ("on-off blinking"). We have analyzed the fluorescence blinking dynamics of these spots using a variety of single-molecule analysis approaches, including fluorescence intensity histograms, autocorrelation analysis, as well as cross-correlation analysis as a function of distance between individual transition dipole moments, and propose a simple physical model for the fiber structure based on the observed blinking dynamics, in which the polymer fibers contain numerous structural defects. The model was supported by grazing incidence X-ray diffraction measurements of the mixed monolayer films at the air-water interface, in which it was observed that the presence of perfluorocarbon in the mixed monolayers significantly inhibited the ability of the 10,12-pentacosadiynoic acid to polymerize.

Morphological and Interaction Characteristics of Surface-Active Ionic Liquids and Palmitic Acid in Mixed Monolayers.

A series of water soluble, surface-active ionic liquids (SAILs), namely, 1-alkyl-3-methyl imidazolium chlorides ([Cn -mim]Cl) and their mixtures with palmitic acid (PA) are investigated in Langmuir monolayers and Langmuir-Blodgett films. It is inferred from the surface pressure-area isotherms that C16 -mim-IL mixes non-ideally with PA and stabilizes the binary mixed films. In addition, the residence of mim-IL at the water surface is enhanced as a function of the increasing alkyl side chain length. Generally, the compressional moduli values decrease upon increasing the content of the mim-ILs over a wide range of compositions. Furthermore, film relaxation measurements indicate that the IL component is selectively excluded from the mixed films upon achieving a certain target pressure. Brewster angle microscope images demonstrate minimal changes on the PA domains in the presence of either C4 - and C8 -mim-ILs, whereas presence of the hexadecyl counterpart results in the formation of condensed sheets. Atomic force microscopy imaging of deposited films show the formation of propeller-like aggregates when C8 - or C16 -mim-IL is present in the mixed films.

Immiscible Anionic Gemini Surfactant-Perfluorinated Fatty Acid Langmuir Monolayer Films.

A new member of the N,N,N',N'-dialkyl-N,N'-diacetate ethylenediamine family of anionic gemini surfactants has been synthesized, and its miscibility with the model perfluorocarbon, perfluorotetradecanoic acid (PF), has been investigated in monolayer films at the air-water interface. Thermodynamics of mixing and the accompanying changes in the mixed film structure have been probed using a combination of compression isotherm measurements supported by Brewster angle microscope imaging and X-ray scattering measurements, and results have been compared with those collected for a previously studied, shorter tail chain variant of the surfactant. Thermodynamic measurements showed that the gemini surfactant and perfluorotetradecanoic acid were immiscible, with weak repulsive interactions, manifesting as small positive deviations from ideal mixing, observed between the two film components. Films were highly textured, with micrometer-scale, phase-separated domains readily detectable. Grazing incidence X-ray diffraction measurements showed that the gemini surfactant was disordered in the monolayers, whereas the perfluorocarbon formed discrete crystallites in the disordered matrix. Despite the small deviations from ideal mixing detected in the thermodynamic measurements, the X-ray measurements indicated that the presence of the gemini perturbs the PF crystal lattice from that of pure PF. Finally, X-ray reflectivity measurements showed that the addition of equimolar PF to the gemini monolayer induces a significant increase in the nominal head group thickness of the film, suggesting that interactions between the two surfactants can lead to structural rearrangements of gemini's head group near to the water surface.

Exciton Dynamics of Photoexcited Pendant Porphyrin Polymers in Solution and in Thin Films.

Several new polymers with rotatable zinc porphyrin pendants have been synthesized and their optical spectroscopic and photophysical properties, including upconversion efficiencies, determined in both fluid solution and thin films. Comparisons made with the ß-substituted zinc tetraphenylporphyrin monomers and ZnTPP itself reveal that the yield of triplets resulting from either Q-band or Soret-band excitation of the polymers is surprisingly small. A detailed kinetic analysis of the fluorescence decays and transient triplet absorptions of the substituted monomers and their corresponding polymers reveals that this phenomenon is due to two parallel internal singlet quenching processes assigned to transient intrachain excimer formation. Consequently, the yields of upconverted S2 fluorescence resulting from Q-band excitation in the degassed polymers are significantly diminished in both fluid solution and thin films. Implications of these results for the design of polymer upconverting systems are discussed.

Molecular-Level Structure and Packing in Phase-Separated Arachidic Acid-Perfluorotetradecanoic Acid Monolayer Films.

Synchrotron-based X-ray scattering measurements of phase-separated surfactant monolayers at the air-water interface provide molecular-level structural information about the packing and ordering of film components. In this work, grazing incidence X-ray diffraction (GIXD) and X-ray reflectivity (XR) measurements were used to collect crystallographic structural information for binary mixed monolayers of arachidic acid (AA, C19H39COOH) with perfluorotetradecanoic acid (PA, C13F27COOH), a system that has previously been investigated using a variety of thermodynamic and micron-scale structural characterization methods. GIXD measurements at surface pressures of π = 5, 15, and 30 mN/m indicated that AA in pure and mixed films forms a rectangular lattice at π = 5 and 15 mN/m but a hexagonal lattice at π = 30 mN/m. PA formed hexagonal lattices under all conditions, with films being highly ordered and crystalline (as determined by Bragg peak width) at even the lowest surface pressures investigated. Phase separation occurred for all mixed monolayer film compositions and surface pressures, manifesting as diffraction peaks characteristic of the individual components appearing at different in-plane scattering vector qxy. For both pure and mixed films, the molecular tilt angle of the AA hydrocarbon chain toward the nearest-neighbor was substantial at low pressures but decreased with increasing pressure. The PA fluorocarbon chain showed negligible molecular tilt under all conditions, and was oriented normal to the subphase surface regardless of surface pressure or the presence of AA in the films. In all cases, the two components in the mixed film behaved entirely independently of film composition, which is exactly the expected result for a fully phase-separated, immiscible system. XR measurements of film thickness at the air-water interface supported these results; overall film thickness approached the calculated ideal surfactant tail lengths with increasing surface pressure, indicating nearly normal oriented surfactants. The overall surfactant packing and crystallographic features of the mixed monolayers are discussed in terms of the lipophobic nature of the perfluorinated surfactant as well as in context of thermodynamic miscibility and domain structure formation reported elsewhere in the literature for these mixed monolayer systems.

Photophysics of Zinc Porphyrin Aggregates in Dilute Water-Ethanol Solutions.

Dimeric and multimeric aggregates of a model metalloporphyrin, zinc tetraphenylporphyrin (ZnTPP), have been produced in a controlled manner by incrementally increasing the water content of dilute aqueous ethanol solutions. Steady state absorption, fluorescence emission, and fluorescence excitation spectra have been measured to identify the aggregates present as a function of solvent composition. The dynamics of the excited states of the aggregates produced initially by excitation in the Soret region have been measured by ultrafast fluorescence upconversion techniques. Only the monomer produces measurable emission from S2 with a picosecond lifetime; all Soret-excited aggregates, including the dimer, decay radiationlessly on a femtosecond time scale. The S1 state is the only significant product of the radiationless decay of the S2 state of the excited monomer, and the aggregates also produce substantial quantum yields of S1 fluorescence when initially excited in the Soret region. The resulting fluorescent aggregates all decay on a subnanosecond time scale, likely by a mechanism that involves dissociation of the excited monomer from the excitonic multimer. The ZnTPP dimers excited at their ground state geometries in the Soret region exhibit a dynamic behavior that is quite different from those produced following noncoherent triplet-triplet annihilation under the same conditions. The important implications of these observations in determining the aggregation conditions promoting efficient photon upconversion by excitonic annihilation in a variety of media are thoroughly discussed.

Mixing Behavior in Binary Anionic Gemini Surfactant-Perfluorinated Fatty Acid Langmuir Monolayers.

The miscibility and film structure of mixed Langmuir monolayer films composed of an anionic gemini N,N,N',N'-dialkyl-N,N'-diacetate ethylenediamine surfactant (Ace(12)-2-Ace(12)) with perfluorotetradecanoic acid (C13F27COOH; PF) have been investigated using a variety of thermodynamic and structural characterization methods. The two film components were found to be miscible in monolayers at the air-water interface over a range of compositions and at all but the lowest surface pressures, with attractive interactions occurring between the two components. While pure PF monolayers formed crystalline lattices with hexagonal symmetry and with the surfactant tails oriented normal to the underlying water subphase, the pure gemini surfactant formed amorphous films with little tendency to orient at the subphase. In mixed films with mole ratios of PF:Ace(12)-2-Ace(12) < 2.5, the miscibility of the two components resulted in a nearly complete loss of crystallinity of the PF, though films at higher mole fractions of PF showed some residual crystallinity, albeit with lattice structures that were significantly different from that of pure PF. Miscibility and film structure in this mixed system are discussed in comparison with other mixed gemini surfactant systems in the literature as well as binary mixtures of phospholipids or monomeric fatty acids with PF.

Phase-separated surfactant monolayers: Exploiting immiscibility of fluorocarbons and hydrocarbons to pattern interfaces.

The mutual immiscibility of hydrogenated and fluorinated surfactants at interfaces frequently leads to phase-separation, which provides a useful and flexible method for patterning air-water and solid-air interfaces. In this article, we review recent advances in the use of hydrogenated-fluorinated surfactant mixtures to achieve interfacial patterning. For even relatively simple systems comprised of binary mixed monolayers of hydrogenated and perfluorinated fatty acids, a diverse range of film morphologies can be generated at the air-water interface and successfully transferred onto solid substrates. Systematic investigations reported over the past several years have allowed for correlation between the chemical structure of the film constituents with the gross film morphology and underlying crystalline structure of the films. Early thermodynamic models based on the interplay between dipole-dipole repulsion forces between charged headgroups balanced by line tension between phases that were formulated to describe phase-behavior in simple phospholipid monolayer systems have proven highly useful to describe morphologies for the immiscible surfactant blends. Beyond simple binary fatty acid mixtures, highly-structured films have also been reported in mixed phospholipid systems, which have found important application in controlling the physical, compositional and performance properties of lung surfactant mixtures, as well as in semifluorinated alkane monolayers which form unique, hemimicellar structures at both liquid and solid interfaces. We also describe advances in using these approaches to pattern photopolymerizable, luminescent surfactants, which have found extensive use in colorimetric and fluorometric sensing devices. The long-term outlook for this field, with an emphasis on potential applications and future research directions are discussed.

Determinants of the efficiency of photon upconversion by triplet-triplet annihilation in the solid state: zinc porphyrin derivatives in PVA.

Spectroscopic, photophysical and computational studies designed to expose and explain the differences in the efficiencies of non-coherent photon upconversion (NCPU) by triplet-triplet annihilation (TTA) have been carried out for a new series of alkyl-substituted diphenyl and tetraphenyl zinc porphyrins, both in fluid solution and in solid films. Systematic variations in the alkyl-substitution of the phenyl groups in both the di- and tetraphenyl porphyrins introduces small, but well-understood changes in their spectroscopic and photophysical properties and in their TTA efficiencies. In degassed toluene solution TTA occurs for all derivatives and produces the fluorescent S2 product states in all cases. In PVA matrices, however, none of the di-phenylporphyrins exhibit measurable NCPU whereas all the tetraphenyl-substituted compounds remain upconversion-active. In PVA the NCPU efficiencies of the zinc tetraphenylporphyrins vary significantly with their steric characteristics; the most sterically crowded tetraphenyl derivative exhibits the greatest efficiency. DFT-D computations have been undertaken and help reveal the sources of these differences.

Exploring the Impact of Tail Polarity on the Phase Behavior of Single Component and Mixed Lipid Monolayers Using a MARTINI Coarse-Grained Force Field.

Coarse-grained molecular dynamics simulations have been used to investigate the effect of dipalmitoylphosphatidylcholine (DPPC) tail group polarity on the structural and phase behavior of both single component and binary mixed monolayers using the MARTINI force field. Surface pressure-area isotherms of single component systems indicate that DPPC monolayers become more expanded as a function of increasing tail group polarity, as observed in experimental measurements in the literature. A combination of radial distribution functions and tilt angle measurements indicate that increasing tail group polarity results in the formation of increasingly disordered monolayers. For the mixed monolayer systems, the time dependence of the radial distribution function as well as average cluster size measurements indicate that phase separation takes place between components of different tail group polarity when the monolayers undergo phase transition into disordered configurations.

Morphology and Composition of Structured, Phase-Separated Behenic Acid-Perfluorotetradecanoic Acid Monolayer Films.

The phase separation of immiscible surfactants in mixed monolayer films provides an approach to physically manipulate important properties of thin films, including surface morphology, microscale composition, and mechanical properties. In this work, we predict, based upon existing miscibility studies and their thermodynamic underpinnings described in the literature, the miscibility and film morphology of mixed monolayers comprised of behenic acid (C21H43COOH) and perfluorotetradecanoic acid (C13F27COOH) in various molar ratios. Predictions are tested using a combination of experimental surface characterization methods for probing miscibility and film morphology at the solid/air and air/water interfaces. Film components were immiscible and phase-separated into chemically well-defined domains under a variety of experimental conditions, with monolayer morphology consistent with initial predictions. The extensibility of these basic predictions to other systems is discussed in the context of using these works for different perfluorinated surfactant molecules.

White light generation using Förster resonance energy transfer between 3-hydroxyisoquinoline and Nile Red.

Simple composite films consisting of a polymer blended with organic emitters have the potential for broad-band "white" light emission that can be used for general lighting applications. In the present work, a simple mixture of 3-hydroxyisoquinoline (HIQ) with Nile Red (NR) in a polymeric matrix of polyvinyl alcohol (PVA) is used to generate white light through a non-radiative excitation energy transfer (NREET) mechanism. NREET between HIQ and NR doped in PVA films is investigated using a combination of steady state and time resolved fluorescence spectroscopic methods. It is observed that NR has very weak fluorescence in the PVA film upon excitation at 400 nm, but upon mixing NR with HIQ, sensitized emission of NR is observed with decreased emission of HIQ. The behavior of the sensitized emission of NR is consistent with Förster resonance energy transfer (FRET) between the donor HIQ and acceptor NR. By adjusting the relative fractions of HIQ and NR in the films, the extent of FRET could be regulated and the overall film emission color could be manipulated to enable overall "white" (CIE color coordinates 0.34, 0.38) emission. The films showed excellent photostability with 405 nm diode illumination, along with mechanical flexibility, suggesting good potential utility as a down converting element for lighting applications.

Spectroscopic and Structural Studies of a Surface Active Porphyrin in Solution and in Langmuir-Blodgett Films.

Controlling aggregation of the dual sensitizer-emitter (S-E) zinc tetraphenylporphyrin (ZnTPP) is an important consideration in solid state noncoherent photon upconversion (NCPU) applications. The Langmuir-Blodgett (LB) technique is a facile means of preparing ordered assemblies in thin films to study distance-dependent energy transfer processes in S-E systems and was used in this report to control the aggregation of a functionalized ZnTPP on solid substrates. This was achieved by synthetic addition of a short polar tail to one of the pendant phenyl rings in ZnTPP in order to make it surface active. The surface active ZnTPP derivative formed rigid films at the air-water interface and exhibited mean molecular areas consistent with approximately vertically oriented molecules under appropriate film compression. A red shift in the UV-vis spectra as well as unquenched fluorescence emission of the LB films indicated formation of well-ordered aggregates. However, NCPU, present in the solution phase, was not observed in the LB films, suggesting that NCPU from ZnTPP as a dual S-E required not just a controlled aggregation but a specific orientation of the molecules with respect to each other.

Spectroscopic and photophysical study of the demetallation of a zinc porphyrin and the aggregation of its free base in a tetraalkylphosphonium ionic liquid.

Dissolving zinc tetraphenylporphyrin in the tetraalkylphosphonium chloride ionic liquid P4448Cl results in progressive demetallation of the solute and quantitative production of the free base porphyrin. Aggregation of the free base occurs in which the monomer and J aggregates are in fully reversible thermal equilibrium in the ionic liquid. The thermodynamic, kinetic and spectroscopic behaviour of this system is described based on absorption, emission and excited state lifetime measurements. Both the thermodynamics of the ground state aggregation and the kinetics of the excited state relaxation processes are unusual due to the particular role played by the ionic liquid solvent.

Polarized fluorescence microscopy analysis of patterned, polymerized perfluorotetradecanoic acid-pentacosadiynoic acid thin films.

Photoillumination of mixed films comprised of the photopolymerizable fatty acid 10,12 pentacosadiynoic acid and perfluorotetradecanoic acid deposited onto glass substrates gives rise to the formation of oriented polydiacetylene photopolymer fibers. The degree of polymer fiber orientation was investigated using dual-view, polarized fluorescence microscopy of the polydiacetylene, which allowed for characterization of individual fluorescent polymer fibers after photopolymerization, as well as comparison of the orientation of different fibers within the same sample. Measurements indicated that individual fibers consisted of multiple photopolymer strands with various orientations, and that there was a preferred orientation for fibers in the film as a whole. The fibers were preferentially oriented at an angle of approximately 60° to the direction of film compression during deposition from a Langmuir trough, with orientation being the result of mechanical stress exerted by the compression barriers coupled with rotation of the polymer fibers during film draining. These measurements were complemented with conventional "bulk" fluorescence polarization experiments, and compared with mixed film structures described previously for these systems at the air-water interface using Brewster angle microscopy.